Viscosity Range ( cps) 5,10,50,100,500,1000,5000,12500,30000,60000,100000 @25 deg.

Viscosity standards are essential for ensuring accurate and consistent measurements in various laboratory and industrial applications. They serve as reference points to calibrate viscometers and other instruments that measure fluid viscosity.

High Accuracy

• 1.0% of viscosity value.

Excellent Temperature Stability

• Less temperature-sensitive than oil viscosity standards.

Versatile Compatibility

• Recommended for Brookfield and most other rotational viscometers.

Economical Choice

• Cost-effective calibration solution.

Certified Standards

• Methods traceable to National Institute of Standards and Technology (NIST).

Custom Options Available

• Special viscosity values and temperature calibrations upon request.

Convenient Packaging

• Fluids ≥30,000 cP: Supplied in 16 oz (500 mL) containers.
• Fluids <30,000 cP: Supplied in 32 oz (1,000 mL) containers.
• All include a certificate of calibration.

• Adjustable speed from 300 to 4200 RPM & timer setting


• Digital display – Shows speed and time alternatively at every 5 secs


• Unique programmable pulse mode function – User enabled run time and off time setting


• 3 way switch (On/Off/Touch) with Power On LED


• Orbital diameter of 4 mm


• Can be used in hoods & cold rooms


• Sticker indicator of permissible speed for various attachments

Product Description

The Lab Touch can measure aW for many samples, whether liquid, gel-like or solid and with its ergonomic design and touch screen, it makes water ac��vity measurement easier than ever before.The Lab Swi�� is suitable for products such as powder or dried fruits with low to medium aW values. Is op��onally available with arechargeable ba��ery.The Lab Start, designed as a starter, allows water ac��vity measurement at an economical budget.

New Vision -2000LED 

Binocular Microscope with battery back up.

“Eltek” Micro controller based Orbital shaker incubator inner chamber is made stainless steel 304 Grade.8mm thick outer mild steel(1mmthick)powdercoated.controlthespeedfrom50to300 RPM with TIMER, Temperature and speed indicator.Temprange 5°C above ambient to 60°CwithUniversalPlatform450x450mm can Accommodate 12flasks of 500ml or 16n oof 250mlor25Nos. of100mlor9Nos.of1000mlor4Nos.of2000mlFlask.

SPECIFICATIONS:

Method: Volumetric Titrator

Measuring Range: 100 PPM to 100 % with appropriate

sample quantity

End Point Confirmation Time: 20 sec. Fixed

Dispensing Resolution: 0.01 ml

Vessel Capacity: 200 ml (Optional 350 ml)

Display: 20 Character x 4 line LCD Backlit Display

Keyboard: 4 x 4 Feather Touch Key Board.

MOC: MS Powder Coated.

SS Cabinet available on request.

Printer Port: 25 Pin D type Parallel Port for

Dot Matrix Printer

Dimensions: 40x35x30 cm Weight : 15 kg approx

Power Supply: 230 Volt AC 50 Hz Power 100 W Max.

Ambient Condition: Temperature: 5 to 40 Deg C

Humidity: Less than 85 % RH

ACCESSORIES:

Vessel, Platinum Electrode, Clamp, Rotor, Inlet and Outlet

Tubes, Micro-liter Syringe, Instruction Manual.

TECHNICAL DETAILS:

• Temperature range:

15°C above room temperature - 300 °C.

• Accuracy: Better than 0.5 °C.

• Temperature resolution: 0.1 °C.

• Heating rate: 1 °C/minute or 0.5 °C/minute.

(Starts from set temperature – 10 °C).

• Power Supply: 230V, 50Hz, 500 W.

• Capillary: length -125 mm; Diameter: 1.4 – 1.6 mm.

• Display: 240 x 128 Graphic LCD.

• Input: Tactile Keyboard + PS - 2 keyboard.

• Compatible with DOT MATRIX printer.

This model is a simple Abbe Refracto-meter with thermometer and is extremely reliable. You can evaluate liquid samples, solid samples as well as p a s t e s a m p l e s . K e y f e a t u r e s o f t h i s refractometer are its sturdiness and its ease of use. As an option there is also a beautifully-made aluminium transport and storage box available. The refraction index nD is measured.  The models are universal, analogue Abbe refractometers  The practical and robust design means that it can be used simply, efficiently and on a permanent basis, day in day out  The integrated scale allows it to be used in many application areas and offers the best possible security for being able to read the measuring result accurately Application :  Main areas of application:  Sugar industry (raw cane sugar)  Pharmaceuticals Lab  Food processing industry  Chemical industry  Oil industry/Refineries  Laboratories  Institute, Research, Lab. Standard Accessories 1 x Abbe refractometer ABBE-REF 1 1 x screwdriver 1 x thermometer 1 x user manual.

New User Interface

- Keypad control

- Sharp viewing screen

for close up or

distance viewing

No Calculations Required

- Direct reading of

viscosity

Displayed Info:

- Viscosity

(cP, P, mPa•s or Pa•s)

- % Torque

- Speed/Spindle

Easy-to-Use

Range:

Push for determining

full scale range (FSR)

viscosity

18 Speeds

for complete range

capability

Bubble Level

conveniently located

for easy adjustment

Accuracy: ±1.0% of range

Repeatability: ±0.2%

FLAME PHOTOMETER DIGITAL with Na & K Filters Compressor included.  Auto Ignition
 

Digital Display of R.P.M., Actual and Set Temp. Motorised Lift arrangement for Glass Assambly. ALL CONTROLS AT THE PRESS OF A BUTTON, Accommodates Evaporating Flask upto 2 lit. capacity Geared Drive Unit offers a smooth speed rotation, R.P.M. Control from 20 to 200 R.P.M. precisely controlled with analog knobs. Double walled Bath - seamless inner vessel SS 304, outer AL with high grade insulation to eliminate heat loss. Digital Temp. Control from ambient plus 5°C to 180°C. Lift is fitted on main base with double ball bearing to provide jerk free up and down movement upto 200mm. Extended bracket to hold the geared drive unit can also accommodate condenser clamp hanger with extra S.S. rod for vertical and cold trap condensers. Unit base made of thick M.S. sheet coated with a layer of epoxy based polyester paint, providing a scratch less & chemical resistant surface. Vacuum and water Inlet / Outlet assembly is fixed at the rear of the lift for easy operation. Main ON/OFF switch is on the central processing unit fitted at the rear of water bath. Control panel is placed in the front and operated with soft touch press buttons. Borosilicate glass parts set comprising of condenser, evaporating flask Kjeldhal shape 800ml / 1000ml, receiving flask cap. 1000 ml with S-35 cup, vapour path tube B-24, feed tube with teflon extension, gasket seal, standard joint clip B-24, Ball joint clip S-35 are standard part of equipment. All borosilicate glass parts are interchangeable. Power Supply 230 v AC, 50 Hz, Single phase.

Tabletop Orbital Shaker with Microcontroller to control the speed from 50 to 250 RPM with TIMER and speed indicator. Brushless Steeper Motor .Universal platform size of 350mmx350mm .Flask holding capacity 9Nos.X250ml or 6 Nos.500ml or 4 Nos.1000ml or 4Nos.2000ml (without holding clamps)

Ultrasonic units are used in Industrial and Analytical Laboratories. With their high power, optimized parameter settings and strict parameter monitoring and assisted by a large range of useful accessories the ultrasonic units guarantee safe and reliable results for t h e m u l t i f a c e t e d l a b o r a t o r y a p p l i c a t i o n s . T h e L a b o r a t o r y equipment is complete with a full programme of cleaning chemicals developed and produced in our own laboratory.

Application : Laboratory Get consistent cleaning with every cycle. Our Ultrasonic baths throughly r e m o v e b l o o d , p r o t e i n , a n d contaminants. Use it for everything from glassware to lenses to instruments and precision components.

Features :  High quality imported components, high ultrasonic transfer efficiency, strong power, good cleaning effect.  Silicone heater used.  Countdown digital Timer display.  Bigger Tank with Special basket for cleaning.  Digital Heater & Timer Function.  304Stainless Steel shell, no rust, beautiful and generous.  New weld, better waterproof performance.

 

 

OVEN (LABORATORY TYPE) Double walled, outer body made of Mild Steel and inside made of mild Steel stainless steel 304. The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat loss & thereby saving energy. Temperature Range 50°C to 250°C, with accuracy ±2°C. Temperature is controlled by DIGITAL. Heating element of lab model has only one at the bottom side and is made of special grade chrome plated Nicrome wire (ISI approved). Shelves Supplied with galvanised wire mesh.

This Unit Makes Moisture Content Measurements Quick and Easy • The moisture ratio is found by heating the sample with the built-in halogen heater to drive out the moisture. • The measurement procedure is simple. Just close the heater cover to start the measurement (automatic starting mode). • Measurements are faster than the loss on drying method using a dryer. • A USB connector makes connecting to a PC easy (built-in Balance Keys function). • Equipped with the UniBloc aluminum block mass sensor

Rectangular-Horizontal Muffle Furnace outer body made of thick gauge Mild steel with powder coating Most useful for ashing, fusion & heat treating of small parts in chemical, industrial field & col leges. Uniform heat distribution through all four sides with kanthal A - 1 elements. A special fuse for protection of element in case of over heating. Temperature maximum 1050° C working upto: 1000° C controlled by Microprocessor based P.I.D. Digital Temperature Controller, Dual Display one for set point & the other for process temperature.

 

On required provide Temperature maximum 1150° C working.. 

SINGLE Drum Model & DOUBLE Drum Model 

Mircoprocessor based 4 Digit Preset revolution counter 9999, 25 revolution / min, Universal acrylic drum for right & left side. Easy loading & unloading of the drum, Provided with Drum.

 

Eltek Laboratory Refrigerator they are equipped with Hermitical type heavy duty compressors. Inner chamber have direct airflowsystemfortemperatureuniformitytomaintainvitaloperationalTemperatureof2to8˚C.Displayensurescrystalclear andaccuratetemperaturevaluesfromlongdistance.Thetransparentinnerdoorprovidesclearviewingkeptinthechamber.

Technical Specification:  Micro controller based graphic LCD display  CFC free refrigerant and high density PUF insulation  Audio–Visual alarm when the temperature deviates  Inner SS304 Grade Stainless steel and outer Mild steel powder coated  Blower motors for Temperature uniformity inchamber  LED lamp for chamber internal visibility  Password Protected control panel  Purported Stainless Steel heavy duty Trays  Castor wheels for easy mobility  Input Voltage 230VAC 50Hz  Accuracy : ±1˚C