Laboratory Incubators

 * Adjustable S.S wires mesh Shelves. * Microprocessor Based PID Temperature digital controller cum Indicator with pt 100 (RTD) sensors. Dual display one for process value (PV) and another for Set value of temperature(SV) * Temperature range 5 °C to 60 °C Temp. accuracy ± 0.5 °C * Temperature uniformity ± 0.1 °C. * Illumination provided for inner chamber. * Thermostatic Safety controller i.e. thermostat to cut of dry heater supply in case temperature of B.O.D. overshoot. * Control panel consists with Indicating Lamp for Compressor, Heater and ON/OFF Rocker * Switch for Mains and Illumination for all purpose & control. * Forced air circulation Fan for uniform temperature. * Hermetically sealed compressor Unit for CFC free cooling system as per the capacity * Castor wheels for easy movability. * Power supply 230V AC 50Hz.

INCUBATOR BACTERIOLOGICAL (LABORATORY TYPE )Double walled, outer body made of Mild Steel and inside made of stainless steel 304. The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat loss & thereby saving energy. Temperature 5°C above ambient to 60°C, with accuracy ± 2°C.Temperature is controlled by DIGITAL Heating element of lab model has only one at the bottom side and is made of special grade chrome plated Nicrome wire (ISI approved). Shelves Supplied with galvanised wire mesh.

Size - 14"x14"x14"

“Eltek” Micro controller based Orbital shaker incubator inner chamber is made stainless steel 304 Grade.8mm thick outer mild steel(1mmthick)powdercoated.controlthespeedfrom50to300 RPM with TIMER, Temperature and speed indicator.Temprange 5°C above ambient to 60°CwithUniversalPlatform450x450mm can Accommodate 12flasks of 500ml or 16n oof 250mlor25Nos. of100mlor9Nos.of1000mlor4Nos.of2000mlFlask.